| 20 watt Solar power system with quality
modules |
General description:
Complete 20 Watt solar power for applications with 1,36 Amp. Solar charge requirement. Comprises 1 high quality solar module, support structure, charge regulator, all cabling and plugs for installation.
|
 |
Technical Specifications:
The system contain the following components :
- 1 piece of: Single crystalline Solar modules of 20 Wp. The solar modules are designed to meet or exceed the environmental requirements.
Solar charge controller:
The charge controller is a 12 Volt, 5 Amp solar charge and 5 Amp consume output, ensure overcharge and low voltage protection.
Module support structure type HEM-SM20, designed for mounting of 1 module of type Siemens SM20. The structure is made of strong aluminum capable of high withstanding wind speeds. Variable leg length gives rise to an adjustable tilt angle. The structure is equipped with supporting feet of stainless steel and all necessary nuts and bolts.
Battery pack:
- 2 meter of cable 1x1,5 m2 for inter module cabling.
- 1 piece of safe packing and transport of the equipment.
- 1 piece High quality Sealed, maintenance-free Gel battery
Accessories/Spare parts/Consumable:
The following accessories can be bought separately:
- Solar panel 20Wp
Weight/Volume/Dimensions:
- estimated weight: 8,90 kg
Shipping details:
Batteries are approved for airfreight.
Instructions for use:
The Panels is mounted electrically and secured to the aluminum support structure. The Panel is installed on suitable and secure location with direct view of the sun. Support structure elevation is adjusted for maximum (geographical and day-round) solar power.
Cable run from panels to the charge regulator and from the charge regulator to the battery, load from the charge regulator.
The panels should be cleaned water at regular intervals to assure maximum effect.
print page
|
>
|
|
